Owner/Operator & Parts ManualModel89203100466300A 3/07Printed in USAGrass Collection System with Dump Hopper200 Series
104. Connect the left and right door opening linkages to the main frame with one Rue-Ring cotter pin (item 33) per side.5. Test the function of the du
11Install Front Baffle and Finger Guard on Blower Assembly (Figure 10)1. Remove one mounting bolt from the idler release lever.2. Choose the appropria
12Install Blower Assembly on Deck1. Remove discharge chute and right belt cover from the deck. 2. Install the drive belt on the blower assembly.NOTE:
135. Replace the belt cover removed in step 1. Keep the discharge chute for operating the machine without the blower attached.NOTE: If you prefer tool
14REMOVING BAGGER KIT1. Remove the hose from the blower assembly and collector inlet (see figure 15 on page 13).2. Remove belt cover.3. Remove V-belt
15If hose or blower assembly gets clogged, stop forward motion and allow unit to clear itself. If unit will not clear itself, unclog the hose and/or b
16IMPORTANT: NEVER spray unit with high-pressure water. DO NOT store unit outdoors.Clean plastic surfaces with sponge and mild detergent. Dry with a s
17DECALSItem Part No. Qty. Description1 07735200 2 Decal, Danger2 07742300 1 Decal, Warning3 08088200 1 Decal-Caution, Grass Pump4 05225500 1 Decal, G
18COUNTERWEIGHTSItem Part No. Qty. Description1 06228300 1 Bolt .312-18 x 4.52 01542200 4 Counterweight3 07531700 2 Knob, Wing .312-18 UNC (Tool-less
19––– NOTES –––
2Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20GRASS CONTAINER ASSEMBLY43130675318910111312214151617181920212224252627282923323334353839403736
21GRASS CONTAINER ASSEMBLYItem Part No. Qty. Description1 00197800 1 Frame, Top Main2 00615701 1 Frame, Main Left Leg3 00615702 1 Frame, Main Right Le
22BLOWER HOUSING ASSEMBLYPDd002212634571110981215131617313211428182930272026252422221921233433357174440384239434138483637154546154739495150
23BLOWER HOUSING ASSEMBLY (CONTINUED)Item Part No. Qty. Description1 06545400 11 Nut, .31-18 Nyloc Flange2 00451951 1 Cover, Blower3 05978900 1 Bolt,
Ariens Company • 655 W. Ryan St, P.O. Box 157 • Brillion, WI 54110-0157• (920) 756-2141 • www.ariens.com ALW2 - 3507Ariens Limited Warranties2-Year Li
Ariens Company • 655 W. Ryan St, P.O. Box 157 • Brillion, WI 54110-0157• (920) 756-2141 • www.ariens.com ALW2 - 3507Exceptions, Limitations, Exclusion
GRAVELY655 West Ryan StreetP.O. Box 157Brillion, WI 54110-0157920-756-2141Fax 920-756-2407www.gravely.com
33. Review control functions and operation of the unit. Do not operate the unit unless all controls function as described in this manual.4. Review rec
41. DANGER! To Avoid Serious InjuryDO NOT operate mower unless guards are in place or grass pump and entire bagger are attached.ALWAYS wear adequate h
5SAFETY RULESRead, understand, and follow all safety practices in this Manual, Owner/Operator Manual, and Engine Manual before beginning assembly. Fai
6ALWAYS allow adequate clearance for unit, attachments, operator and objects in work area when turning. Slow down before turning.NEVER carry passenger
7TOOLS REQUIRED• Wrenches: 7/16", 1/2", 9/16"•Drill• 13/32" Drill bit• Utility KnifeUNPACKING UNITIMPORTANT: Remove contents from
8MOUNTING HARDWAREODD0182134513151611129876101721440394137304748202418252123ODd0436 Figure 2192622352728293132333436384544434246
9INSTALLATIONAdjust the Parking BrakeNOTE: The additional weight of the grass container requires a parking brake re-adjustment.1. Remove the rear whee
Comments to this Manuals